How to Replace Coobie Bra Pads in Any Style

By Coobie Bra | Official Store of Seamless Bras & Underwear | Published: 2026-10-20

Category: How-to Guides

Learn how to remove and insert Coobie replacement pads in any seamless bra style. Step-by-step instructions for water drop pads with tips to avoid bunching and misalignment.

Quick Answer

To replace Coobie bra pads, open the side or top slit, remove the old pad, and insert the new water drop pad with the rounded edge downward, then smooth it flat through the fabric.

Why Water Drop Pads Fit Differently

Coobie’s latest replacement pads use a water drop shape rather than a triangle or circle. The rounded bottom and tapered top are designed to follow your natural breast contour, which reduces shifting and visible edges under clothing. The shape also means orientation matters more than with symmetric pads—inserting them upside down can cause bunching at the top of the cup.

When to Replace Your Bra Pads

Over time, pads can flatten, warp, or develop creases from washing. If your bra cups look lumpy or the padding feels uneven, it is time for a swap. Coobie replacement pads are sold individually or in pairs, so you can replace just one side if needed. The latest version has smooth edges and a softer feel compared to older pads, which helps them stay in place during wear.

How to Replace Coobie Bra Pads Step by Step

1. Locate the pad opening: Check the inside of your bra cup for a small slit on the side or top. Coobie seamless bras typically have an opening near the armpit or along the top edge. Gently stretch the fabric to expose the opening without tearing the seam. Do not force the opening if it feels tight—stretch the fabric slowly to avoid damaging the lining.
2. Remove the old pad: Pinch the edge of the existing pad through the opening and pull it out. If the pad is stuck, reach in from the opposite side of the cup and push it toward the opening. Dispose of worn or misshapen pads. If the old pad is twisted, do not yank it—untwist it first to avoid tearing the bra lining.
3. Orient the new water drop pad: Hold the new Coobie replacement pad so the rounded, wider end points downward and the narrower tip points upward. This matches the natural shape of your breast and prevents the pad from bunching at the top of the cup. Inserting the pad upside down is the most common mistake—check the orientation before you push it in.
4. Insert the pad through the opening: Fold the pad gently in half lengthwise and slide it into the opening. Once inside, unfold it by smoothing the fabric from the center of the cup outward. Make sure the pad lies flat against the bra lining without wrinkles or folds. If the pad feels bunched, reach through the opening and reposition it rather than adjusting from outside the fabric.
5. Smooth and check the fit: Wear the bra briefly and move your arms to see if the pad shifts. If it feels uneven, open the slit and adjust the pad position. The water drop shape should stay centered without needing frequent fixes. A pad that shifts during movement may be too small for the cup—confirm you have the correct size for your bra style.

What You Need

Coobie Replacement Pads (Latest Version, Water Drop Shape, 1 Pair, Any Bra Matching Color): Compatible with styles including 9012, 9042, 9015, 9095, 9140, 9142, 9045, 9128, 9146, 9094, 9147, 9075, and 9129. You can use the same replacement pad across most Coobie seamless bras, so you only need one product for multiple bras.
Coobie Replacement Pads (Latest Version, Water Drop Shape, 1 Pair, Any Bra Matching Color)